Sign In | Join Free | My fazendomedia.com
China Hangzhou LianLi Electrical Co.,Ltd logo
Hangzhou LianLi Electrical Co.,Ltd
Hangzhou LianLi Electrical Co.,Ltd Ranlic Products Are The Part Of Your Life!
Site Member

6 Years

Home > Metal Conduit Box >

Prefab Open Box Stud Mud Ring Brackets 16inch 24 inch Rough-in Come With Outlet Box and Protective Cover Zinc Plated

Hangzhou LianLi Electrical Co.,Ltd

Prefab Open Box Stud Mud Ring Brackets 16inch 24 inch Rough-in Come With Outlet Box and Protective Cover Zinc Plated

Brand Name : AXWILL & RANLIC

Model Number : 5467678

Certification : ISO9001 2015

Place of Origin : CHINA

MOQ : 1000 set

Price : 1USD

Payment Terms : L/C, T/T

Supply Ability : 100000 pcs/WEEK

Delivery Time : 25 DAYS

Packaging Details : carton and plastic bag

Material : Q195

Length : 16 24 inch

Max Device : 6 gang

Thickness : 1.60mm

PREFAB : ruffin

Gang : 3-5 gang

Contact Now

Prefab Open Box Stud Mud Ring Brackets 16inch 24 inch Rough-in Come With Outlet Box and Protective Cover Zinc Plated


Open box mounting bracket
1)Open box support allows for adjustablility of box position between studs
2) Support most North American boxes and/or plaster rings 4" SQ 4-11/16SQ
5"SQ and multi-gang boxes
3) Fits up to 1-1/2" wide studs 16" &24"on center
4) Compatible with rapid ring & adjustable plaster rings
5) Field cut to adjust to non-standard stud spacings
6) Stamped markings at 1/2" 1/4"and 1" increments to allow the installer to easily locate the desited box position
7) You may contact us for pre-fab assemblies
8) Bracket accessories require no tools to install
9) Fllor stand ensures consistent box height and eliminates need to measure for proper install height.


Alignment plate can be cut on a mark to make shorter length brackets
Can be used with floor stand

Increase strength and rigidity help withstand the stress of stress of drywall installation

Assemblies shipped with box installed on left side of brackets, unless othersie specified

The wall stud improved far-side support stands up during drywall,installation and out performs competitor bracket

Installation steps:

  1. Install Bar hangers on ceiling joists or wall studs by screws.
  2. Take off screw from stud on bar hanger, installs in 1/2" knockouts located on the bottom of boxes.
  3. All above 5 Bar hangers are installed with metallic boxes on wall studs or ceiling joists.
  4. When intended to support a fixture/luminaire in a wall, load capacity is 6 kg (13 Ib).

Application: These wall support brackets are used to support electrical boxes from floor or concrete forms.
They also help prevent electrical boxes from being pushed back into the wall cavity during drywall installation.
Advantages: fold back stabilizers ensure an easy and secure electrical box installation in wall applications. They are designed to mount square boxes on walls 12"to 24" above the floor. floor and wall kick plate support brackets have box screws that are exposed after mounting so the conduits can be secured from the front of the box opening. Additionally, their multiple heights accommodate a variety of fnished floor heights.


Application: These multi-box mounting brackets are used to secure conduit boxes in stud walls.
Advantages: Multi box mounting brackets allow the installer to quickly and easily mount 4", 4-11/16" or 6"square conduit boxes in stud walls.


Application: This box mounting bracket is used to support electrical box mounted to wood studs.

They screw directly to the face of wood studs.


Mansory Steel Junction Box 1.60MM Thickness Universal Knockouts Zinc Plated Silver Surface Pre fab Function

ZT-R911.0mm wall thickmixed hole or one size hole 1-1/2" DEEP
ZT-R921.2mm wall thickmixed hole or one size hole 1-1/2" DEEP
ZT-R931.5mm wall thickmixed hole or one size hole 1-1/2" DEEP
ZT-R941.60mm (UL Listed)mixed hole or one size hole 1-1/2" DEEP

1) Using for EMT conduit cover for octangular / square / rectangle box.

2) All using automatic punching machine & molds, precise for each products.

3) K.O.S can make mixed size or only one size.

4) C/O cover and screws. Can make the bottom side hole as the terminal hole

5) Come without terminal brass part unless ordered, can be make one or two adjustable lug, thickness from 0.60mm to 1.60mm




1.Q: What kind of material you can offer?
A: We can offer you GALVANIZED STEEL, STAINLESS STEEL, ALUMINUM, Zinc, etc.


2.Q: What kind of standard you are following?
A: We are producing following by UL standard, most popular around the world,

of course, we also have customized products.You can provide your specification.

3.Q: Could you change the size for the customer?
A: Yes, we do for some customer special size.


4.Q: How many days can you deliver the order?
A: Normally after deposit or L/C 20-30 days, actually it depends on your request.

5.Q: What about the payment?
A: We can accept L/C, T/T, D/P and trusted payment methods.


6.Q: Do you provide samples?
A: yes, we can offer the standard product sample freely, but we do not bear the freight. Sample preparation will take some time, and if you asked to use DHL, FedEx, etc. to send samples, you can inform us in advance to prepare.


7.Q: Are you a trading company or manufacturing company?
A: Both we are, we have ten years experiences in foreign trading business and more than five years in electrical conduit industry. Of course, we are always expanding our business.

8.Q: How can you guarantee your products?
A: we guarantee your 100% satisfaction on all our products. Please feel free to feedback us immediately if you are not satisfied with our quality or service. If the product does not meet the contract requirements, we will send you a free replacement or give you compensation in the next order. For foreign orders, we ensure every order carefully. In some special cases, we will give some discounts as a solution.

9.Q: How about your capability in manufacturing?

Based on reasonable price, good quality, great after service, and Workers' Passion and Effort, we are capable of manufacturing 6000 tons of steel conduit per year and 4000 tons of die casting and steel accessories anually.

Choosing us is the best choice.

Designed for use with rigid/IMC and EMT conduit, these 5" steel boxes are suitable for audio, video, data and power applications in healthcare, education, commercial and government facilities.


5-Gang Box, Welded, 2-1/2 in. Deep, Eight 3/4 & 1 in. Concentric KO's, Six 1/2 in. KO's, and Ten 3/4 in. KO's
  • Gang boxes save time in installation, no need to gang boxes together.
  • Have 3/4" and 1" concentric KO's for use with a wide variety of wiring methods.
  • Bottom KO pattern, 3-1/2" and 2-3/4" at either end of box.
  • Accepts two styles of covers, flat and 3/4" raised device cover.
  • Use low voltage partitions #947 or #949.

0.8mm wall thick1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL
1.0mm wall thick1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL
1.2mm wall thick1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL
1.5mm wall thick1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL

0.8mm wall thick1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL
1.0mm wall thick1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL
1.2mm wall thick1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL
1.5mm wall thick1/2" HIGHT, HOT DIP GALVANIZED STEEL COIL

Electrical 1.60mm Multi-Using Cover Conduit Junction Box Pre Galvanized Telescoping 1/2"D

Electrical 1.60mm Cover Conduit Junction Box Pre Galvanized One Two Gang 5/8" Deep

Electrical Conduit Box Cover Heavy Duty 1.60mm Cover With Screws

Ruff-IN Plate Brackets & Wall stud


Electrical 1.60mm Multi-Using Cover Conduit Junction Box Pre Galvanized One Two Gang 1/2" Deep


Increase strength and rigidity help withstand the stress of stress of drywall installation

Assemblies shipped with box installed on left side of brackets, unless othersie specified

The wall stud improved far-side support stands up during drywall,installation and out performs competitor brackets


16" STUD SPACINGcome with stop plate
24" STUD SPACINGsleeve extender
Self Adjustable Pre-fab Ringprotective plate box plate

Installation steps:

  1. Install Bar hangers on ceiling joists or wall studs by screws.
  2. Take off screw from stud on bar hanger, installs in 1/2” knockouts located on the bottom of boxes.
  3. All above 5 Bar hangers are installed with metallic boxes on wall studs or ceiling joists.
  4. When intended to support a fixture/luminaire in a wall, load capacity is 6 kg (13 Ib).

Application: These wall support brackets are used to support electrical boxes from floor or concrete forms.
They also help prevent electrical boxes from being pushed back into the wall cavity during drywall installation.
Advantages: fold back stabilizers ensure an easy and secure electrical box installation in wall applications. They are designed to mount square boxes on walls 12”to 24” above the floor. floor and wall kick plate support brackets have box screws that are exposed after mounting so the conduits can be secured from the front of the box opening. Additionally, their multiple heights accommodate a variety of fnished floor heights.


Application: These multi-box mounting brackets are used to secure conduit boxes in stud walls.
Advantages: Multi box mounting brackets allow the installer to quickly and easily mount 4”, 4-11/16” or 6”square conduit boxes in stud walls.


Application: This box mounting bracket is used to support electrical box mounted to wood studs.

They screw directly to the face of wood studs.


Pre-Fab RUFF-IN products leave all the troubles in our factory, to efficiantly and save time for the end user.


Open box mounting bracket
1)Open box support allows for adjustablility of box position between studs
2) Support most North American boxes and/or plaster rings 4" SQ 4-11/16SQ
5"SQ and multi-gang boxes
3) Fits up to 1-1/2" wide studs 16" &24"on center
4) Compatible with rapid ring & adjustable plaster rings
5) Field cut to adjust to non-standard stud spacings
6) Stamped markings at 1/2" 1/4"and 1" increments to allow the installer to easily locate the desited box position
7) You may contact us for pre-fab assemblies
8) Bracket accessories require no tools to install
9) Fllor stand ensures consistent box height and eliminates need to measure for proper install height.


Alignment plate can be cut on a mark to make shorter length brackets
Can be used with floor stand



Packaging & Delivery
Packaging Details
1. Skin Packing each products/master ctn
2. Inner ctn,master ctn
3. Each piece one plastic package,master ctn
Port
Shanghai/Ningbo
Lead Time:
20-30 days.

1. Pictures of emt conduit box


2. Descriptions of emt conduit box

1) Using for EMT conduit cover for octangular / square / rectangle box.

2) All using automatic punching machine & molds, precise for each products.

3) K.O.S can make mixed size or only one size.

4) C/O cover and screws. Can make the bottom side hole as the terminal hole

5) Come without terminal brass part unless ordered, can be make one or two adjustable lug, thickness from 0.60mm to 1.60mm.


DESCRIPTION

AXWILL Telescoping Rigid Box Support - 16 Inch-24 Inch Stud SPACING (ax25)
  • Accommodates up to 6-gang box in 16 Inch stud spacing or up to 10-gang in 24 Inch stud spacing
  • Will support four electrical boxes in 24 Inch stud spacing
  • Open design allows a variety of positions for box location
  • Easy to adjust after the electrical box is installed
  • For use with 4 Inch square and 4-11/16 Inch boxes and mud rings
  • Unique, one-piece, break apart design

Telescoping Rigid Box Support 0.80mm Thickness 6 Gang Maximum Box Can Install

1) Increased strength and rigidity help withstand the stress of drywall installation
2) Assembly shipped with box installed on left side of bracket
3) The cover plate required fix also
4) Cable Wire also can fixed(include the terminal cable)
5) Assembly include alignment plate for easy adjust
6) The whole bracket with the size scale in order easy to adjust
Interlocking wrap-around design provides extra rigidity
pre-assembled at 3-5/8" back tabs can be folded out for 4"
multiple brackets may be ganged together
BOX BAR HANGERS, CAT. NOS. RL-HC02, RL-HC12, RL-HC24, RL-HC36, RL-CA22


bracket for 16" or 24"stud spacing
1,measure distance between studs
2,cut measurd ruler mark after
3,screw parts together
4,boxes size is 4" or 4-11/16" square
General - Made of Pre-galvanized steel. See following table, FIG., ILL. and dimensions for details.

Cat. Nos.FIG. No.ILL. No.Accessory
RL-HC0211No
RL-HC1222No
RL-HC2433No
RL-HC3644No
RL-CA2255No



BOX SUPPORT BRACKETS, CAT. NOS. RL-GB10, RL-GB20, RL-GB15, RL-GB25, RL-GB30, RL-GB40, RL-GB50, RL-GB60, RL-GB70, RL-GB80, RL-GB90.

General - Made of Pre-galvanized steel. See following table, FIG., ILL. and dimensions for details.

Cat. Nos.FIG. NoILL. No.Accessory
RL-GB1066No
RL-GB2077No
RL-GB1588No
RL-GB2599No
RL-GB301010No
RL-GB401111No
RL-GB501212No
RL-GB601313No
RL-GB701414No
RL-GB801515No
RL-GB901616No



Application: These multi-box mounting brackets are used to secure conduit boxes in stud walls.
Advantages: Multi box mounting brackets allow the installer to quickly and easily mount 4", 4-11/16" or 6"square conduit boxes in stud walls.


Application: These universal box mounting brackets are used to support electrical boxes mounted to metal or wood studs. They screw directly to the face of metal or wood studs.
Advantages: box mounting brackets are made from pre-galvanized steel ensuring durability and mechanical protection.
Stand off, fold back stabilizer tabs keep boxes from twisting in wall cavities


Application: These wall support brackets are used to support electrical boxes from floor or concrete forms.
They also help prevent electrical boxes from being pushed back into the wall cavity during drywall installation.
Advantages: fold back stabilizers ensure an easy and secure electrical box installation in wall applications. They are designed to mount square boxes on walls 12"to 24" above the floor. floor and wall kick plate support brackets have box screws that are exposed after mounting so the conduits can be secured from the front of the box opening. Additionally, their multiple heights accommodate a variety of fnished floor heights.



Application: This box mounting bracket is used to support electrical box mounted to wood studs.
They screw directly to the face of wood studs.

Installation steps:
  1. Install Bar hangers on ceiling joists or wall studs by screws.
  2. Take off screw from stud on bar hanger, installs in 1/2" knockouts located on the bottom of boxes.
  3. All above 5 Bar hangers are installed with metallic boxes on wall studs or ceiling joists.
  4. When intended to support a fixture/luminaire in a wall, load capacity is 6 kg (13 Ib).



Best Prefab Open Box Stud Mud Ring Brackets 16inch 24 inch Rough-in Come With Outlet Box and Protective Cover Zinc Plated wholesale

Prefab Open Box Stud Mud Ring Brackets 16inch 24 inch Rough-in Come With Outlet Box and Protective Cover Zinc Plated Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Hangzhou LianLi Electrical Co.,Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)